Hunan Yanmagnet

Home › Products › Mould List

Ferrite Motor Magnet Tile Mould List — 99 Existing Sizes Ready for Production99 套现有模具规格

Below is our existing mould list for ferrite motor magnet tiles (stator arc segments): 99 sizes covering outer diameters 21.3–225 mm, wall thickness 2.9–15 mm, chord width 13.5–94 mm and axial length 14–112 mm. If your motor's stator tile matches or is close to any size below, we can supply samples without new tooling cost — usually within one week. Sizes not listed can be made with new tooling; send us your drawing for a feasibility reply and quotation.

以下是我司铁氧体电机磁瓦(定子弧形瓦)现有模具清单:共 99 个规格,外径 21.3–225 毫米、壁厚 2.9–15 毫米、弦宽 13.5–94 毫米、轴向高度 14–112 毫米。若您的电机磁瓦尺寸与下列规格一致或接近,可免开模费快速打样;未列出的尺寸可开新模生产,欢迎来图洽谈。

Ref OD (mm) ▾ ID (mm) Wall (mm) Chord (mm) Axial (mm) Arc height (mm) Angle (°)

OD = outer diameter = 2 × outer arc radius; ID = inner diameter; wall = (OD − ID)/2. Chord is the maximum width across the outer arc. Dimensions in mm, measured on sintered & ground surfaces. Grades Y30 / Y30BH / Y33 / Y35 / Y38 available for all sizes. Tolerances: outside arc −0.10, inside arc +0.10, thickness ±0.10, others ±0.15 mm. 外径 OD = 2×外弧半径;内径 ID = 2×内弧半径;壁厚 = (OD−ID)/2。弦宽为外弧面最大宽度。单位毫米。全部规格可提供 Y30 / Y30BH / Y33 / Y35 / Y38 牌号。公差:外弧 −0.10、内弧 +0.10、厚度 ±0.10、其余 ±0.15 毫米。

Block magnet tooling

方块模具

We also keep block (segment) magnet tooling: . Custom block sizes on request.

另有方块磁体模具:。异形方块可来图定做。

How to use this list

如何使用本清单

1. Find your size.
Measure your tile with a caliper: outer diameter (or outer radius), wall thickness, chord width, axial length. Filter the table by OD and wall.
2. Exact match → samples without tooling.
We ship matched, same-grade sample pairs from existing tooling, typically within one week.
3. Close but not exact → light machining.
Grinding can adjust wall thickness and surfaces within tolerance; we confirm feasibility before quoting.
4. No match → new tooling.
Send your drawing; we reply with feasibility, grade recommendation (Y30–Y38), tooling cost and lead time.
1. 找尺寸。
用卡尺量外径(或外弧半径)、壁厚、弦宽、轴向高度,按外径和壁厚筛选表格。
2. 完全一致 → 免开模打样。
直接用现有模具出样,一般一周内发货,可按牌号配对供样。
3. 接近但不一致 → 轻加工。
磨加工可在公差内调整壁厚与表面,先确认可行再报价。
4. 无接近规格 → 开新模。
来图即复:可行性、牌号建议(Y30–Y38)、模具费与交期。

FAQ

常见问题

Do you have an existing mould for my tile size?
Check the table above — it covers 99 sizes from 21.3–225 mm OD. If your size matches a listed mould, samples need no new tooling.
What if my size is not listed?
We build new tooling for custom ferrite motor magnet tiles. Send your drawing (OD, ID/wall, chord, axial length, arc height, angle) and target grades for a quotation.
What are your standard tolerances?
Outside arc −0.10 mm, inside arc +0.10 mm, thickness ±0.10 mm, other dimensions ±0.15 mm. Tighter ground-surface tolerances on request.
Which grades are available?
Anisotropic sintered ferrite Y30, Y30BH, Y33, Y35, Y38 (Br ≈ 0.39–0.45 T). We help select the grade for your required flux and working temperature.
Magnetised or unmagnetised?
Both. Tiles are supplied magnetised per your motor's polarity pattern (alternate polarity segments), or unmagnetised for your own magnetising line.
MOQ and samples?
Existing-mould sizes: quick samples at low cost. Production MOQ depends on size — contact us with your drawing.
有我尺寸的现成模具吗?
见上表:共 99 个规格,外径自 21.3–225 毫米起。尺寸一致即可免开模打样。
没有我的尺寸怎么办?
可开新模定制。提供图纸(外径、内径或壁厚、弦宽、轴高、弧高、角度)与目标牌号,即复报价。
标准公差是多少?
外弧 −0.10、内弧 +0.10、厚度 ±0.10、其余 ±0.15 毫米;磨加工面可做更严公差。
有哪些牌号?
各向异性烧结铁氧体 Y30、Y30BH、Y33、Y35、Y38(Br ≈ 0.39–0.45 T),按电机磁通与工作温度选牌。
充磁还是不充磁交货?
均可。可按电机极性要求充磁(相邻瓦片反极性),也可不充磁交由贵司充磁线处理。
起订量与样品?
现有模具规格可快速低价打样;量产起订量按尺寸而定,来图洽谈。

Send us your tile drawing — feasibility reply within 24 hours

来图即复 —— 24 小时内回复可行性

OD / ID or wall / chord / axial length / arc height / angle + target grade = quotation with sample plan.

提供外径/内径或壁厚、弦宽、轴高、弧高、角度与目标牌号,即获报价与打样方案。

WhatsApp Contact form