HomeProductsEngine Cooling Fan Motor Magnet Tiles

Engine Cooling Fan Motor Magnet Tiles

Ferrite Arc Magnets for Automotive Radiator / Condenser Fan PMDC Motors

Ferrite motor magnet tiles for under-hood heat: Y30BH high intrinsic coercivity resists start-up surge, ground arc faces keep the air gap uniform — built for sustained high temperature, vibration and start-up inrush.

01The Story Behind a Reliable Engine Cooling Fan

Under the bonnet, the cooling fan fights heat all day long — it pulls air through the radiator to keep the engine at the right temperature. Inside that motor, a curved magnet does the heavy lifting: the ferrite motor magnet tile.

Cooling-fan motors face a hard job: sustained high temperature near the engine, constant vibration, and a current surge every time the fan kicks in. Ferrite (ceramic) permanent magnets handle all three well. They are rare-earth free, hold a stable cost, resist thermal demagnetization far better than many alternatives, and keep their flux at high temperature. But not all ferrite arc magnets are equal. Yanmagnet grades and processes the tile for the specific demands of an engine-cooling fan: high intrinsic coercivity against dynamic demagnetization, stable output across a wide temperature range, and a precise arc surface that keeps the air gap uniform.

02Key Features

  • Material: anisotropic sintered ferrite (ceramic) permanent magnet — rare-earth free, cost-stable
  • Grades: Y30BH and Y35, selected for high-temperature stability
  • Shape: 120° / 150° / 180° arc tiles, supplied as matched pairs or segmented blocks
  • Thermal stability: flat output from −40 °C to +105 °C, retaining performance near the engine bay
  • Demagnetization resistance: high Hcj (≥235 kA/m for Y30BH) resists the current surge at fan start-up
  • Precision: ±0.02 mm ground ID / OD surfaces for a uniform air gap around the rotor
  • Consistency: tight per-batch flux window keeps motor torque curves repeatable

03Application Range

Suitable for:

  • Radiator cooling fan motors (PMDC type)
  • Condenser / air-conditioning fan motors
  • Electric fan drives operating continuously and intermittently under engine-bay heat and vibration

04Technical Parameters

4.1 Grade magnetic performance

GradeBr (mT)Hcb (kA/m)Hcj (kA/m)(BH)max (kJ/m³)Typical IEC
Y30BH390–415225–240≥23527.0–30.3HF8/26
Y35405–425200–215≥21530.0–33.4HF8/26–27

4.2 Typical size range

ParameterRange
Arc angle120° / 150° / 180° (pair or segment)
Inner diameter (ID)approx. 20–40 mm
Axial height12–40 mm
Wall thickness3–6 mm
Standard tolerance±0.05 mm (±0.02 mm on ground surfaces)
Magnetizationdiametral (2-pole) or multipole per motor design

05Quality & Testing Standard

  • Standard: GB/T 12796, aligned to IEC 60404 / HF series
  • System: ISO 9001; ROHS / REACH compliant
  • Inspection: 100% flux check and 100% dimensional check before dispatch
  • Documentation: batch test report (COA) included with every order
Inspection itemMethod / standard
Magnetic flux (Br)Fluxmeter, per batch
Coercivity (Hcj / Hcb)Test per GB/T 12796
High-temperature retentionThermal cycling / high-temp aging test
Dimensional accuracyCaliper / CMM, ±0.02 mm on ground surfaces
Coating adhesionCross-cut + salt-spray (optional)
Appearance100% visual check

06Production Process

Main steps (flow): Raw material batching → Ball milling → Pre-sintering → Powder milling → Magnetic-field pressing → Sintering → Precision grinding → Coating (optional) → Magnetizing → 100% inspection → Packing

07Usage & Selection Guide

  • Selecting a grade: choose Y30BH when high-temperature stability and start-up demagnetization resistance matter most; choose Y35 for higher output in a compact motor
  • Mounting: respect pole orientation; supply as matched pairs
  • Optional magnetic pairing & sorting: tiles sorted into narrow flux windows to cut vibration and cogging noise, keeping motor-to-motor speed consistent
  • Design note: send your drawing, a sample, or the motor nameplate — we match the closest existing tooling (300+ ready tooling sets, no tooling cost for standard sizes)

08Foreign-Trade Process — How We Work Together

1. Inquiry → 2. Drawing / sample confirmation → 3. Quotation → 4. Pre-production sample → 5. Confirmation → 6. Bulk production → 7. Inspection & COA → 8. Shipment → 9. After-sales support

Typical lead time 15–20 days for standard orders; annual capacity 8,000 t; OEM / ODM welcome.

09Success Cases

Case 1 — High-temperature stability confirmed: a cooling-fan motor maker operating near the engine bay reported output drop in summer. Switching to Y30BH with a wider high-temperature window restored stable torque and cut field returns.

Case 2 — Start-up surge handled: a fan motor line saw occasional demagnetization at the moment of fan start-up. We supplied tiles matched to a higher Hcj (refined Y30BH), and in-rush current no longer caused flux loss.

10After-Sales Service & FAQ

Can the size be customized?
Yes — all arc tiles are custom per drawing; send your drawing or a sample.
What is the MOQ?
Flexible; standard sizes start at small trial quantities.
What is the lead time?
15–20 days for standard orders.
Are the magnets rare-earth free?
Yes — ferrite contains no rare earth, giving stable cost and stable supply.
How do we verify quality?
Every batch ships with a COA; third-party inspection is welcome.

Need Engine Cooling Fan Motor Magnet Tiles?

Send your drawing or sample. We match from 300+ existing tooling sets, no tooling cost for standard sizes.

Hunan Yanmagnet Electronic Technology Co., Ltd.
Hunan Yanmagnet Electronic Technology Co., Ltd.
Hunan Yanmagnet Electronic Technology Co., Ltd.

Specializing in R&D, production, and sales of ferrite motor magnet tile materials, providing high-performance motor magnet tile solutions for new energy vehicles, home appliances, and industrial motors.

Contact Info

© 2026 Hunan Yanmagnet Electronic Technology Co., Ltd. All Rights Reserved

WhatsApp