HomeProductsHVAC Blower Motor Magnet Tiles

HVAC Blower Motor Magnet Tiles

Ferrite Arc Magnets for Automotive Cabin HVAC Blower PMDC Motors

Ferrite motor magnet tiles for long running hours, low noise and low vibration: flux-matched pairing plus precision arc grinding keep blowers quiet, smooth and speed-consistent.

01The Story Behind a Quiet, Powerful HVAC Blower

When you set the climate control in a car, a blower motor spins quietly behind the dash — moving air through the cabin, defroster and vents. At the heart of that motor sits a curved magnet: the ferrite motor magnet tile.

An HVAC blower runs for long periods and must stay quiet and smooth. The blower's torque, low noise and vibration, and speed consistency are decided in large part by the magnet. Ferrite arc magnets are ideal: rare-earth free, cost-stable, and dependable over the long duty cycle. But a blower also lives or dies on how quiet it is. Yanmagnet pays special attention to the details that reduce noise and vibration — precision arc grinding and flux-window pairing so the motor runs smooth, motor after motor.

02Key Features

  • Material: anisotropic sintered ferrite (ceramic) permanent magnet — rare-earth free, cost-stable
  • Grades: Y30BH and Y35 available for different torque / air-flow requirements
  • Shape: 120° / 150° / 180° arc tiles, supplied as matched pairs or segmented blocks
  • Low noise: precision arc surfaces + magnetic pairing sorted into narrow flux windows to cut cogging and vibration
  • Precision: ±0.02 mm ground ID / OD surfaces for a uniform air gap around the rotor
  • Thermal stability: stable output from −40 °C to +105 °C
  • Consistency: tight per-batch flux window keeps motor torque curves repeatable

03Application Range

Suitable for:

  • Cabin HVAC blower motors (PMDC type)
  • Heating / ventilation / air-conditioning fan motors
  • Defroster and demister blowers running continuously, where quiet operation matters

04Technical Parameters

4.1 Grade magnetic performance

GradeBr (mT)Hcb (kA/m)Hcj (kA/m)(BH)max (kJ/m³)Typical IEC
Y30BH390–415225–240≥23527.0–30.3HF8/26
Y35405–425200–215≥21530.0–33.4HF8/26–27

4.2 Typical size range

ParameterRange
Arc angle120° / 150° / 180° (pair or segment)
Inner diameter (ID)approx. 18–36 mm
Axial height12–38 mm
Wall thickness3–6 mm
Standard tolerance±0.05 mm (±0.02 mm on ground surfaces)
Magnetizationdiametral (2-pole) or multipole per motor design

05Quality & Testing Standard

  • Standard: GB/T 12796, aligned to IEC 60404 / HF series
  • System: ISO 9001; ROHS / REACH compliant
  • Inspection: 100% flux check and 100% dimensional check before dispatch
  • Documentation: batch test report (COA) included with every order
Inspection itemMethod / standard
Magnetic flux (Br)Fluxmeter, per batch
Coercivity (Hcj / Hcb)Test per GB/T 12796
Flux-window sortingFluxmeter grouping, for low-noise pairing
Dimensional accuracyCaliper / CMM, ±0.02 mm on ground surfaces
Coating adhesionCross-cut + salt-spray (optional)
Appearance100% visual check

06Production Process

Main steps (flow): Raw material batching → Ball milling → Pre-sintering → Powder milling → Magnetic-field pressing → Sintering → Precision grinding → Flux sorting → Coating (optional) → Magnetizing → 100% inspection → Packing

07Usage & Selection Guide

  • Selecting a grade: choose Y35 when higher output is needed in a compact motor; choose Y30BH where start-up stability and demagnetization resistance matter more
  • Low-noise guidance: request magnetic pairing & flux-window sorting to minimize cogging and motor-to-motor speed variation
  • Mounting: respect pole orientation; supply as matched pairs
  • Design note: send your drawing, a sample, or the motor nameplate — we match the closest existing tooling (300+ ready tooling sets, no tooling cost for standard sizes)

08Foreign-Trade Process — How We Work Together

1. Inquiry → 2. Drawing / sample confirmation → 3. Quotation → 4. Pre-production sample → 5. Confirmation → 6. Bulk production → 7. Inspection & COA → 8. Shipment → 9. After-sales support

Typical lead time 15–20 days for standard orders; annual capacity 8,000 t; OEM / ODM welcome.

09Success Cases

Case 1 — Noise reduction achieved: a cabin-blower maker struggled with whine from cogging. We introduced flux-window sorted pairs with tighter arc tolerance, and the perceived noise level dropped noticeably.

Case 2 — Motor-to-motor consistency: an HVAC fan supplier saw speed vary unit to unit. Flux-matched arcs gave a repeatable torque band, and their assembly first-pass yield improved.

10After-Sales Service & FAQ

Can the size be customized?
Yes — all arc tiles are custom per drawing; send your drawing or a sample.
What is the MOQ?
Flexible; standard sizes start at small trial quantities.
What is the lead time?
15–20 days for standard orders.
Are the magnets rare-earth free?
Yes — ferrite contains no rare earth, giving stable cost and stable supply.
How do we verify quality?
Every batch ships with a COA; third-party inspection is welcome.

Need HVAC Blower Motor Magnet Tiles?

Send your drawing or sample. We match from 300+ existing tooling sets, no tooling cost for standard sizes.

Hunan Yanmagnet Electronic Technology Co., Ltd.
Hunan Yanmagnet Electronic Technology Co., Ltd.
Hunan Yanmagnet Electronic Technology Co., Ltd.

Specializing in R&D, production, and sales of ferrite motor magnet tile materials, providing high-performance motor magnet tile solutions for new energy vehicles, home appliances, and industrial motors.

Contact Info

© 2026 Hunan Yanmagnet Electronic Technology Co., Ltd. All Rights Reserved

WhatsApp