01Built for High-Speed, High-Torque Duty
Power tool motors are asked to do a lot in a small package: spin at high speed, deliver strong stall torque, survive repeated starts and run hot under load. Ferrite (ceramic) arc magnets meet this duty at a stable cost and without rare-earth supply risk.
Yanmagnet's ferrite motor magnet tiles for power tools are graded for high intrinsic coercivity and ground to tight arc tolerances, so motor torque stays consistent and the rotor runs with a uniform air gap even at speed.
02Key Features
- Material: anisotropic sintered ferrite (ceramic), rare-earth free
- Grades: Y30BH and Y35 (≈ C8/C11, HF8/26) for high-speed and stall-torque demand
- Shape: arc tiles, matched pairs or segmented magnets for 2-pole/multipole rotors
- Demagnetization resistance: high Hcj withstands high-current starts and stalls
- Precision: ±0.02 mm ground ID/OD surfaces
- Consistency: tight flux windows for repeatable tool performance
03Application Range
Suitable for:
- Corded and cordless drills / impact drivers
- Angle grinders, circular saws and reciprocating saws
- Rotary hammers, sanders and other PMDC tool motors
- Garden tools and small appliance motors
04Technical Parameters
4.1 Grade magnetic performance
| Grade | Br (mT) | Hcj (kA/m) | (BH)max (kJ/m³) | Equivalent |
|---|---|---|---|---|
| Y30BH | 390–415 | ≥235 | 27.0–30.3 | C8 / HF8/26 |
| Y35 | 405–425 | ≥215 | 30.0–33.4 | C11 / HF8/26-27 |
4.2 Typical size range
| Parameter | Range |
|---|---|
| Arc angle | 120° / 150° / 180° (pair or segment) |
| Outer diameter | approx. 20–70 mm |
| Axial length | 12–50 mm |
| Wall thickness | 2.5–6 mm |
| Standard tolerance | ±0.05 mm (±0.02 mm on ground surfaces) |
| Magnetization | diametral or multipole per motor design |
05Quality & Testing Standard
- Standard: GB/T 12796, aligned to IEC 60404 / HF series
- System: ISO 9001; ROHS / REACH compliant
- Inspection: 100% flux and dimensional check before dispatch
- Documentation: batch test report (COA) with every order
06Production Process
Batching → Ball milling → Pressing → Sintering → Precision grinding → Magnetizing → 100% inspection → Packing
07Usage & Selection Guide
- Selecting a grade: Y30BH for high-speed tools with frequent stalls; Y35 for compact, high-output motors
- Design note: send your drawing or sample — we match from 300+ tooling sets, no tooling cost for standard sizes
- Mounting: matched pairs or multipole rings supplied per motor design
08Foreign-Trade Process & FAQ
1. Inquiry → 2. Drawing/sample confirmation → 3. Quotation → 4. Sample → 5. Confirmation → 6. Bulk production → 7. Inspection & COA → 8. Shipment → 9. After-sales.
