01Why Pumps Rely on Ferrite Magnets
Water pumps — from domestic circulation pumps to submersible borehole pumps and large desalination plant motors — run for thousands of hours in wet, warm conditions. Ferrite (ceramic) magnets are the practical choice: they resist corrosion, hold their flux when hot, and contain no rare earth.
Yanmagnet supplies ferrite motor magnet tiles tailored to pump duty, with optional epoxy or electrophoretic coatings for salt-spray and humidity resistance, and precision ground arc faces that keep the motor air gap uniform for quiet, efficient running.
02Key Features
- Material: anisotropic sintered ferrite (ceramic), rare-earth free
- Grades: Y30BH and Y35 (≈ C8/C11, HF8/26)
- Coating: optional epoxy / ED coating for wet and saline environments
- Shape: arc tiles and segmented magnets for 2-pole and multipole designs
- Thermal stability: stable output in warm, continuously running motors
- Precision: ±0.02 mm ground surfaces for a uniform air gap
- Consistency: tight flux windows for stable pump head and flow
03Application Range
Suitable for:
- Submersible borehole and deep-well pump motors
- Domestic and industrial circulation pump motors
- RO water-purifier pumps and booster pumps
- Desalination plant and HVAC water pump motors
04Technical Parameters
4.1 Grade magnetic performance
| Grade | Br (mT) | Hcj (kA/m) | (BH)max (kJ/m³) | Equivalent | Coating |
|---|---|---|---|---|---|
| Y30BH | 390–415 | ≥235 | 27.0–30.3 | C8 / HF8/26 | Epoxy / ED optional |
| Y35 | 405–425 | ≥215 | 30.0–33.4 | C11 / HF8/26-27 | Epoxy / ED optional |
4.2 Typical size range
| Parameter | Range |
|---|---|
| Arc angle | 120° / 150° / 180° (pair or segment) |
| Outer diameter | approx. 20–90 mm |
| Axial length | 15–70 mm |
| Wall thickness | 2.5–7 mm |
| Standard tolerance | ±0.05 mm (±0.02 mm on ground surfaces) |
| Magnetization | diametral or multipole per motor design |
05Quality & Testing Standard
- Standard: GB/T 12796, aligned to IEC 60404 / HF series
- System: ISO 9001; ROHS / REACH compliant
- Inspection: 100% flux and dimensional check; salt-spray test on coated parts
- Documentation: batch test report (COA) with every order
06Production Process
Batching → Ball milling → Pressing → Sintering → Precision grinding → Coating (epoxy/ED) → Magnetizing → 100% inspection → Packing
07Usage & Selection Guide
- Selecting a grade: Y30BH for general pump duty; Y35 where higher output is needed in a compact motor
- For submersible/saline service, specify epoxy or ED coating at inquiry
- Send your drawing or sample — we match from 300+ existing tooling sets
08Foreign-Trade Process & FAQ
1. Inquiry → 2. Drawing/sample confirmation → 3. Quotation → 4. Sample → 5. Confirmation → 6. Bulk production → 7. Inspection & COA → 8. Shipment → 9. After-sales.
