01The Story Behind a Smooth Window Regulator
Every time a window glides up or down at the press of a button, a compact motor does the work behind the door panel. Inside it, a curved magnet delivers the torque and holding force: the ferrite motor magnet tile.
A window regulator motor lives in a tight space and must run smoothly and quietly, then hold the window in position against wind and road vibration. Ferrite arc magnets are ideal here: rare-earth free, cost-stable, compact and dependable. But a window motor demands tight tolerances — the magnet must fit a small housing with a narrow air gap. Yanmagnet focuses on the details that matter: precision on the arc surfaces, thin-wall forming capability, and batch-to-batch flux consistency so the window motor runs quiet and reliable, window after window.
02Key Features
- Material: anisotropic sintered ferrite (ceramic) permanent magnet — rare-earth free, cost-stable
- Grades: Y30BH and Y35 available for different torque / holding-force requirements
- Shape: 120° / 150° / 180° arc tiles, supplied as matched pairs or segmented blocks
- Thin-wall forming: capable of slim cross-sections to fit compact window-motor housings
- Precision: ±0.02 mm ground ID / OD surfaces for a narrow, uniform air gap around the rotor
- Thermal stability: stable output from −40 °C to +105 °C
- Consistency: tight per-batch flux window keeps motor torque curves repeatable
03Application Range
Suitable for:
- Power window regulator motors (PMDC type)
- Window lift motors for front and rear doors
- Side-window and quarter-window drives where compact size and smooth motion matter
04Technical Parameters
4.1 Grade magnetic performance
| Grade | Br (mT) | Hcb (kA/m) | Hcj (kA/m) | (BH)max (kJ/m³) | Typical IEC |
|---|---|---|---|---|---|
| Y30BH | 390–415 | 225–240 | ≥235 | 27.0–30.3 | HF8/26 |
| Y35 | 405–425 | 200–215 | ≥215 | 30.0–33.4 | HF8/26–27 |
4.2 Typical size range
| Parameter | Range |
|---|---|
| Arc angle | 120° / 150° / 180° (pair or segment) |
| Inner diameter (ID) | approx. 16–32 mm |
| Axial height | 10–32 mm |
| Wall thickness | 2.5–5 mm |
| Standard tolerance | ±0.05 mm (±0.02 mm on ground surfaces) |
| Magnetization | diametral (2-pole) or multipole per motor design |
05Quality & Testing Standard
- Standard: GB/T 12796, aligned to IEC 60404 / HF series
- System: ISO 9001; ROHS / REACH compliant
- Inspection: 100% flux check and 100% dimensional check before dispatch
- Documentation: batch test report (COA) included with every order
| Inspection item | Method / standard |
|---|---|
| Magnetic flux (Br) | Fluxmeter, per batch |
| Coercivity (Hcj / Hcb) | Test per GB/T 12796 |
| Dimensional accuracy | Caliper / CMM, ±0.02 mm on ground surfaces |
| Thin-wall integrity | Visual + dimension check on thin cross-sections |
| Coating adhesion | Cross-cut + salt-spray (optional) |
| Appearance | 100% visual check |
06Production Process
Main steps (flow): Raw material batching → Ball milling → Pre-sintering → Powder milling → Magnetic-field pressing → Sintering → Precision grinding → Coating (optional) → Magnetizing → 100% inspection → Packing
07Usage & Selection Guide
- Selecting a grade: choose Y30BH when start-up stability and demagnetization resistance matter most; choose Y35 for higher output in a compact motor
- Thin-wall note: our thin-wall forming capability lets us match compact window-motor housings without sacrificing strength
- Mounting: respect pole orientation; supply as matched pairs
- Design note: send your drawing, a sample, or the motor nameplate — we match the closest existing tooling (300+ ready tooling sets, no tooling cost for standard sizes)
08Foreign-Trade Process — How We Work Together
1. Inquiry → 2. Drawing / sample confirmation → 3. Quotation → 4. Pre-production sample → 5. Confirmation → 6. Bulk production → 7. Inspection & COA → 8. Shipment → 9. After-sales support
Typical lead time 15–20 days for standard orders; annual capacity 8,000 t; OEM / ODM welcome.
09Success Cases
Case 1 — Compact fit solved: a window-motor maker needed smaller magnets for a slim new door design. We produced a thinner-wall arc tile that kept torque while fitting the tighter housing.
Case 2 — Smooth and quiet operation: an OEM window-drive line sought lower running noise. Tighter arc tolerance and flux-matched pairs reduced vibration and improved perceived quality.
