HomeProductsWiper Motor Magnet Tiles

Wiper Motor Magnet Tiles

Ferrite Arc Magnets for Automotive Wiper (Windscreen Wiper) PMDC Motors

Ferrite motor magnet tiles engineered for automotive wiper PMDC motors — resistant to cold-start demagnetisation, flux-matched in pairs, and consistent batch to batch. 8,000t annual capacity, 300+ existing tooling sets, ready to run.

01The Story Behind a Reliable Wiper

Every time a wiper clears a windscreen in the rain, a small motor spins inside the cowl. That motor's torque, durability, cold-start behavior and quietness are decided in large part by a curved magnet — the ferrite motor magnet tile.

Wiper motors have relied on ferrite (ceramic) permanent magnets for decades. Unlike rare-earth magnets, ferrite needs no scarce raw materials, keeps a stable cost, and holds its magnetism through the high-current stall and low-temperature conditions a wiper must survive. But not all ferrite arc magnets are equal. Yanmagnet focuses on the details that matter: high intrinsic coercivity against dynamic demagnetization, precision on the arc surfaces, and batch-to-batch flux consistency.

02Key Features

  • Material: anisotropic sintered ferrite (ceramic) permanent magnet — rare-earth free, cost-stable
  • Grades: Y30BH and Y35 available for different torque / stall requirements
  • Shape: 120° / 150° / 180° arc tiles, supplied as matched pairs or segmented blocks
  • Coating: optional epoxy or ED (electrophoretic) coating for salt-spray and humidity resistance
  • Precision: ±0.02 mm ground ID / OD surfaces for a uniform air gap around the rotor
  • Thermal stability: stable output from −40 °C to +105 °C
  • Consistency: tight per-batch flux window keeps motor torque curves repeatable

03Application Range

Suitable for:

  • Front windscreen wiper motors (PMDC type)
  • Rear window wiper motors
  • Wiper drives running in intermittent and continuous modes — including cold-cranking high current and repeated stall at the end-stop

04Technical Parameters

4.1 Grade magnetic performance

GradeBr (mT)Hcb (kA/m)Hcj (kA/m)(BH)max (kJ/m³)Typical IEC
Y30BH390–415225–240≥23527.0–30.3HF8/26
Y35405–425200–215≥21530.0–33.4HF8/26–27

4.2 Typical size range

ParameterRange
Arc angle120° / 150° / 180° (pair or segment)
Inner diameter (ID)approx. 18–36 mm
Axial height10–35 mm
Wall thickness3–6 mm
Standard tolerance±0.05 mm (±0.02 mm on ground surfaces)
Magnetizationdiametral (2-pole) or multipole per motor design

05Quality & Testing Standard

  • Standard: GB/T 12796, aligned to IEC 60404 / HF series
  • System: ISO 9001; ROHS / REACH compliant
  • Inspection: 100% flux check and 100% dimensional check before dispatch
  • Documentation: batch test report (COA) included with every order
Inspection itemMethod / standard
Magnetic flux (Br)Fluxmeter, per batch
Coercivity (Hcj / Hcb)Test per GB/T 12796
Dimensional accuracyCaliper / CMM, ±0.02 mm on ground surfaces
Coating adhesionCross-cut + salt-spray (optional)
Appearance100% visual check

06Production Process

Main steps (flow): Raw material batching → Ball milling → Pre-sintering → Powder milling → Magnetic-field pressing → Sintering → Precision grinding → Coating (optional) → Magnetizing → 100% inspection → Packing

07Usage & Selection Guide

  • Selecting a grade: choose Y30BH when stall / cold-start demagnetization resistance is critical; choose Y35 for higher output in a compact motor
  • Mounting: respect pole orientation; supply as matched pairs
  • Optional magnetic pairing & sorting: tiles sorted into narrow flux windows to cut vibration and cogging noise, keeping motor-to-motor speed consistent
  • Design note: send your drawing, a sample, or the motor nameplate — we match the closest existing tooling (300+ ready tooling sets, no tooling cost for standard sizes)

08Foreign-Trade Process — How We Work Together

1. Inquiry → 2. Drawing / sample confirmation → 3. Quotation → 4. Pre-production sample → 5. Confirmation → 6. Bulk production → 7. Inspection & COA → 8. Shipment → 9. After-sales support

Typical lead time 15–20 days for standard orders; annual capacity 8,000 t; OEM / ODM welcome.

09Success Cases

Case 1 — Cold-start demagnetization solved: a wiper motor maker reported torque drop in freezing weather. Switching to Y30BH (higher Hcj) restored consistent stall torque and cut customer complaints on low-temperature start-up.

Case 2 — Batch consistency improved: an aftermarket brand struggled with motor-to-motor speed variation. We introduced flux-window sorting, and their first-pass yield improved significantly.

10After-Sales Service & FAQ

Can the size be customized?
Yes — all arc tiles are custom per drawing; send your drawing or a sample.
What is the MOQ?
Flexible; standard sizes start at small trial quantities.
What is the lead time?
15–20 days for standard orders.
Are the magnets rare-earth free?
Yes — ferrite contains no rare earth, giving stable cost and stable supply.
How do we verify quality?
Every batch ships with a COA; third-party inspection is welcome.

Need Wiper Motor Magnet Tiles?

Send your drawing or sample. We match from 300+ existing tooling sets, no tooling cost for standard sizes.

Hunan Yanmagnet Electronic Technology Co., Ltd.
Hunan Yanmagnet Electronic Technology Co., Ltd.
Hunan Yanmagnet Electronic Technology Co., Ltd.

Specializing in R&D, production, and sales of ferrite motor magnet tile materials, providing high-performance motor magnet tile solutions for new energy vehicles, home appliances, and industrial motors.

Contact Info

© 2026 Hunan Yanmagnet Electronic Technology Co., Ltd. All Rights Reserved

WhatsApp